• Software download
  • Manual
  • Tutorial
Home » Software » CypCut » Tutorial » Machine Config-Origin and Limit
  • Quick Start
  • (Quick Start) Software Preparation
  • (Quick Start) Operation Flow
  • CypCut Basics
  • (Basics) Pre-Knowledge
  • (Basics) Import Drawing
  • (Basics) Optimize Drawing
  • (Basics) Technique Setting
  • (Basics) Toolpath Planning
  • (Basics) Machining Precheck
  • (Basics) Machining Control
  • Function Tips
  • Multi Language
  • Translation Tool
  • Register License
  • Insert Cutting Order
  • Resume Unfinished Cutting in Next Day
  • Find Workpiece Edge and Displacement Angle
  • Create Fly Cut Toolpath
  • Copy Existing Settings to Other Machine
  • Map DXF Layer to CypCut Layer
  • Alarm & Troubleshoot
  • 'Can Not Read the Material Library of Other Manufactures'
  • 'Dongle Not Found or License Expired'
  • Fly Cut Error
  • Machine Config
  • Machine Config-Machine Axis
  • Machine Config-Origin and Limit
  • Machine Config-Laser
  • Machine Config-BCS100 Height Control Unit
  • Machine Config-Gas System
  • Machine Config-Auto Focus
  • Machine Config-Alarms
  • Machine Config-Input Config
  • Machine Config-Output Config
  • Machine Config-Extend I/O
  • Machine Config-Maintenance
  • Machine Config-Table Exchanger
  • Machine Config-WKB Handheld Box
tutorials
Machine Config-Origin and Limit 461

Origin and Limit

To set the direction, speed and sampling signal in returning origin process.

 

enable the function, in CypCut main program will not allow operator to turn off software limit protection. To the contrary, if not check this option, in CypCut main

program there will be an option for user to select if turns on/off soft limit function.

enable the function, each time open CypCut will prompt a dialog box to inform operator execute return origin operation to reset coordinate system.

enable the function, each time open CypCut will prompt a warning of return origin, it exists as an alarm and not allow operator for other operations until

machine return origin.

 

X/Y return origin direction decides coordinate quadrant after return origin. For example, if select X and Y both in negative direction return origin, then result in first coordinate.

Origin signal is to select sample limit switch signal or origin switch signal in return origin.

Limit logic is to set triggered polarity of switch sensor is normal-open or normal-close, CypCut support NPN type limit switch.

Z-phase signal is to set if sample Z-phase signal in return origin. Origin is of higher precision sampling Z-phase signal in return origin.

High speed applied in the coarse positioning of origin switch.

Low speed applied in the fine positioning of origin switch.

Rollback is the distance machine steps back after located origin to keep mechanic zero point away from origin switch a little.

 

 

Machine Config-Origin and Limit 461view

Origin and Limit

To set the direction, speed and sampling signal in returning origin process.

 

enable the function, in CypCut main program will not allow operator to turn off software limit protection. To the contrary, if not check this option, in CypCut main

program there will be an option for user to select if turns on/off soft limit function.

enable the function, each time open CypCut will prompt a dialog box to inform operator execute return origin operation to reset coordinate system.

enable the function, each time open CypCut will prompt a warning of return origin, it exists as an alarm and not allow operator for other operations until

machine return origin.

 

X/Y return origin direction decides coordinate quadrant after return origin. For example, if select X and Y both in negative direction return origin, then result in first coordinate.

Origin signal is to select sample limit switch signal or origin switch signal in return origin.

Limit logic is to set triggered polarity of switch sensor is normal-open or normal-close, CypCut support NPN type limit switch.

Z-phase signal is to set if sample Z-phase signal in return origin. Origin is of higher precision sampling Z-phase signal in return origin.

High speed applied in the coarse positioning of origin switch.

Low speed applied in the fine positioning of origin switch.

Rollback is the distance machine steps back after located origin to keep mechanic zero point away from origin switch a little.

 

 

Welcome to contact us by email

版权所有©上海柏楚电子科技股份有限公司 CopyRight©Shanghai Friendess Electronic Technology Co., Ltd.

Friendess Co.,Ltd.reserves the right to modify the software version and description of product models on the website without prior notice

沪ICP备14033040号-1

版权所有©上海柏楚电子科技股份有限公司

CopyRight©Shanghai Friendess Electronic Technology Co., Ltd.

Follow us Disclaimer
请使用电脑浏览器访问