• Technical Data
  • Hardware
  • Software
  • Manual
  • Certificate

FSCUT2000S medium power laser cutting system is a full-solution open-loop control system specially designed for sheet metal fabricaton industry, with features of easy to install and adjust, excellent performance and fully integrated solutions, it is the upgrade version from FSCUT2000C.

Technical Data

Control card
I/O terminal board
Motor control signal
X/Y1/Y2/W axes pulse output, maximum frequency 3MHz
X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz
W axis port can be assigned as rotary axis or autofocus unit
Dedicated inputs
8 limit inputs: +/-limit for X/Y1/Y2/W axes
4 origin inputs: X / Y1 / Y2 / W axes origin signal inputs:
Common inputs
15 inputs: low-level active by default option, supports NO and NC mode. IN3~IN15 can switch between active low and active high
CypCut Laser Cutting Control Software
Interface type
PCIE bus, X16, 250MB/S
Power supply
24V DC/2A
Work environment
Temperature: 0-55℃
Humidity: 5%-95% (no condensation)
Dedicated outputs
2 DA outputs: 0~10V,50mA
1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)
Common outputs
8 relay output, load capacity 250V AC/5A, 30V DC/5A
12 thyristor output, load capacity DC 24V/500mA


Cutting technique
Support up to 5-stage piercing technique, segment and stepping piercing patterns.
Support the communication with mainstream laser brands on the market.
Support basic technique of Fly cut, frog-leap lifting, kerf width compensation, lead line, micro-joint, pre-piercing, film cutting etc.
Support advanced functions of find workpiece edge, auto focus control, dual shuttle, break point locate, QR code generation, remnant split, round tube cutting etc.
Provide fine cutting technique, smooth start and end in the toolpath cutting.
Support intelligent barrier avoidance, laser head frog-leap lifting in production.
Support scan QR import drawing, task scheduling, and multi-area production etc.
Control performance
Open-loop control system with Friendess 3rd generation motion control algorithms.
Trajectory accuracy 0.03mm, positioning accuracy 0.001 mm, repetitive positioning accuracy 0.003 mm.
Maximum cutting speed 80m/min, maximum position speed 150m/min.
Maximum acceleration 1.5G.
Provide dual-Y drive position error detect function.


Applicable to 1500W ~ 6000W medium power fiber laser cutting machine, widely used in fabricating industries of metal workpiece, kitchen utensils, lamps, cabinets and more.

BCL3766 I/O terminal board


WKB Wireless hand-held remote


BMC2104 PCIE Motion Control Card


C15-1.5/2.5/4 Servo cable


C62-2/5/10 62-pin cable


C37-2/5/10 37-pin cable


CypCut CypCut
CypCut sheet cutting software is an in-depth design for fiber laser cutting industry. It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks.
V6.3.762.6 2000C Version
CypNest CypNest
CypNest is a nesting software designed for CypCut/HypCut sheet laser cutting system. It integrates advanced functions of drawing modification, quick nesting, toolpath generation, analysis report and more to meet your production needs.

Welcome to contact us by email

版权所有©上海柏楚电子科技股份有限公司 CopyRight©Shanghai Friendess Electronic Technology Co., Ltd.

Friendess Co.,Ltd.reserves the right to modify the software version and description of product models on the website without prior notice



CopyRight©Shanghai Friendess Electronic Technology Co., Ltd.

Follow us Disclaimer