• Software Download
  • Manual
  • Video
  • Tutorial
Bevel Cutting of L/C Steel

Description

        The tube may not be cut though completely on the corner when cutting L/C Steel, as shown below.

       To solve this, TubesT provides a function to modify the drawing quickly to make sure the perfect cutting of L/C Steel.

Application

        Select current part, click “Weld Kerf”, then TubesT will generate proper cutting path for its cut-off section automatically(It will not apply compensation if there is no need).

Case 1: Cut-off section rotating along with X axis

(Original drawing)

(Drawing applied Weld Kerf)

Case 2: Cut-off section rotating along with Z axis

(Original drawing)

(Drawing applied Weld Kerf)

Bevel Cutting of L/C Steel 1229view

Description

        The tube may not be cut though completely on the corner when cutting L/C Steel, as shown below.

       To solve this, TubesT provides a function to modify the drawing quickly to make sure the perfect cutting of L/C Steel.

Application

        Select current part, click “Weld Kerf”, then TubesT will generate proper cutting path for its cut-off section automatically(It will not apply compensation if there is no need).

Case 1: Cut-off section rotating along with X axis

(Original drawing)

(Drawing applied Weld Kerf)

Case 2: Cut-off section rotating along with Z axis

(Original drawing)

(Drawing applied Weld Kerf)

Welcome to contact us by email

版权所有©上海柏楚电子科技股份有限公司 CopyRight©Shanghai BOCHU Electronic Technology Co., Ltd.

Shanghai BOCHU Electronic Technology Co., Ltd. reserves the right to modify the software version and description of product models on the website without prior notice

沪ICP备14033040号-1

版权所有©上海柏楚电子科技股份有限公司

CopyRight©Shanghai BOCHU Electronic Technology Co., Ltd.

Follow us Disclaimer
请使用电脑浏览器访问