Operate parts on nesting sheet freely—automatic key point snap and optimal part placement, rotate and align parts in flexible ways, turn on/off

common line effect as wanted, quick array part in parametric method or press-drag style.

Video Tutorial

Operation Guide

1. Three operation status of a part in nesting: idle status, selected and attached on cursor. When a part attached on cursor, user is able to move

the part in nesting sheet, and activate the function buttons of rotation, flip, align and attach etc.

2. The parts operations are rotation, flip, attach and align etc., which can be activated by both shortkey and function button.

3. Array [Ctrl+D]: select a part first, click function button or short key to activate the array function meanwhile open a parametric window,

then slide on the sheet to array the parts.

4. Common Line Array [Ctrl+G]: select a part first, click function button or shortkey to activate the function and meanwhile open

a parametric window to setup common line toolpath, then slide on the sheet to array parts in common line style.

See also CypNest Shortcut Keys

Next Article:

Common Line Toolpath